Update: Lemon Fire in Los Angeles County remains 100% contained by Wednesday morning

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 6:06 a.m. June 17

First discovered: 4 days ago, 2:11 p.m. June 13

Initial location: Near Sierra Hwy and Pearblossom Hwy, South of Palmdale, Los Angeles County, Calif.

Fire unit: Los Angeles County Fire Department

Fire type: Wildfire

Fire name: Lemon Fire

Lemon Fire initially started 2:11 p.m. June 13 at Near Sierra Hwy and Pearblossom Hwy, South of Palmdale in Los Angeles County, California.

Since its discovery four days ago, it has burned 273 acres. By Wednesday morning, the fire crew has achieved full containment of the blaze. The cause of it remains under investigation.

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that the whole perimeter of the wildfire has been surrounded by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published June 17, 2026 at 6:52 AM.