Update: Prunedale Fire in Santa Clara County remains fully contained by Thursday evening

The creation of this content included the use of AI based on templates created, reviewed and edited by journalists in the newsroom. Read more on our AI policy here.

Updated: 9:53 p.m. May 28

First discovered: 16 hours ago, 5:07 a.m. May 28

Initial location: Bloomfield Ave east of Pacheco Pass Highway, Gilroy, Santa Clara County, Calif.

Fire unit: Cal Fire Santa Clara Unit

Fire type: Wildfire

Fire name: Prunedale Fire

Prunedale Fire initially started today at 5:07 a.m. on Bloomfield Ave east of Pacheco Pass Highway, Gilroy in Santa Clara County, California.

Since its discovery 16 hours ago, it has burned 8.5 acres. As of Thursday evening, the fire has been fully contained. However, the cause is still under investigation.

Fire containment

What does 100% containment mean?

Note that full containment doesn't mean the fire is completely out. In this case, it means that the whole perimeter of the wildfire has been surrounded by a control line and it is now stopped from spreading. A fully contained wildfire may continue to burn within the containment perimeter but is not likely to spread.

However, there's a significant difference between containing and controlling a wildfire. After the fire is fully contained, the next step is to control it. Controlling a fire means ensuring that the fire can't spread or cross the containment line.

Containment is part of a larger plan for managing a wildfire. It is normally expressed as a percentage and it refers to how much of the fire perimeter has been surrounded/enclosed by a control line that firefighters create. The containment percentage indicates a certain level of control, but it doesn't always correlate to safety level. Also, it's important to note that containment doesn't mean a fire is out.

How is containment measured?

The incident's central command constantly receives progress reports from firefighters on the ground. As the fireline is constructed, inspected or reinforced, mappers record those details to adjust the containment percentage. The percentage tells the public how much of the fire perimeter is believed to not go beyond the control lines.

Source: Cal Fire

United Robots Sacramento

This story was originally published May 28, 2026 at 6:51 AM.